HGP333A/HGP-333A Triple Gear Pump Hydraulic
| Shaft Key: |
45.0 LB |
| Port Orientation - Cover End: |
Flange Mount |
| Weight: |
Left Hand (CCW) |
| Cover End Pressure [Max: |
2520VQ12A5-11CC20LH |
| Minor Diameter [Min: |
2.5 |
| Seal Material: |
Flange |
| Pump Series: |
N/A |
| Shaft Length: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft Key |
45.0 LB |
| Port Orientation - Cover End |
Flange Mount |
| Weight |
Left Hand (CCW) |
| Cover End Pressure [Max |
2520VQ12A5-11CC20LH |
| Minor Diameter [Min |
2.5 |
| Seal Material |
Flange |
| Pump Series |
N/A |
| Shaft Length |
Standard Pilot |
| Pressure Port Size, Shaft End |
0.875 in |
| Port Size |
13 Tooth Splined |
| Minor Diameter |
2520VQ |
| Port Type |
1 3/8 in |
| Shaft Seal Type |
Double |
| Pressure Port Size, Cover End |
Buna-N |
| Shaft Dia. |
2700 |
| Mounting Flange |
0.715 in |
| Cover End RPM [Max |
SAE B, 2 Bolt |
| Integral Valve Configuration |
Single Shaft Seal |
| GPM @ 1,800 rpm, Shaft End |
16/32 |
| Displacement Cover End (cu in/revolution) |
2700 |
| Spline Description |
2700 |
| Displacement Shaft End (cu in/revolution) |
2.5 |
| GPM @ 1,800 rpm, Cover End |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
0.873 in |
| Relief Valve Setting |
0.872 in |
| Cover End Flow @ RPM |
N/A |
| Controlled Flow Rate |
N/A |
| Manufacturer Part No. |
N/A |
| Shaft End Flow @ RPM |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
2520VQ12A5-11CC20LH |
| Shaft Type |
3000 |
| Shaft End RPM [Max |
3000 |
| Rotation |
7.5 |
| Mounting |
18 |
| Major Diameter [Min |
w/o Integral Valves |
| Minor Diameter [Max |
Outlet 45° CW from Inlet |
| Max. RPM [Max |
Outlet Inline w/Inlet |
| Pilot Type |
3/4 in Flange |
| Major Diameter [Max |
1 in Flange |
| Model No. |
1.1 |