Excavator Diesel Engine 6WG1 ZAX450 Water Pump 8-97615906-0
| GPM @ 1,800 rpm, Cover End: |
45.0 LB |
| Minor Diameter [Min: |
Flange Mount |
| Spline Description: |
Right Hand (CW) |
| Manufacturer Part No.: |
2520VQ12A5-11DD20 |
| Pump Series: |
2 1/2 |
| Shaft Length: |
Flange |
| Rotation: |
N/A |
| Shaft Dia.: |
Standard Pilot |
| PDF |
|
Product Details
| GPM @ 1,800 rpm, Cover End |
45.0 LB |
| Minor Diameter [Min |
Flange Mount |
| Spline Description |
Right Hand (CW) |
| Manufacturer Part No. |
2520VQ12A5-11DD20 |
| Pump Series |
2 1/2 |
| Shaft Length |
Flange |
| Rotation |
N/A |
| Shaft Dia. |
Standard Pilot |
| Cover End Pressure [Max |
0.875 in |
| Controlled Flow Rate |
13 Tooth Splined |
| Port Orientation - Shaft End |
2520VQ |
| Shaft Type |
1 3/8 in |
| Shaft End RPM [Max |
Buna-N |
| Seal Material |
2700 |
| Cover End Flow @ RPM |
0.715 in |
| Mounting Flange |
SAE B, 2 Bolt |
| Pressure Port Size, Cover End |
Single Shaft Seal |
| GPM @ 1,800 rpm, Shaft End |
16/32 |
| Cover End RPM [Max |
2700 |
| Pressure Port Size, Shaft End |
2700 |
| Pilot Type |
N/A |
| Weight |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Port Type |
0.873 in |
| Max. RPM [Max |
0.872 in |
| Port Size |
N/A |
| Port Orientation - Cover End |
N/A |
| Shaft End Flow @ RPM |
N/A |
| Integral Valve Configuration |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Seal Type |
2520VQ12A5-11DD20 |
| Minor Diameter |
3000 |
| Model No. |
3000 |
| Shaft Key |
7.5 |
| Displacement Shaft End (cu in/revolution) |
18 |
| Major Diameter [Max |
w/o Integral Valves |
| Relief Valve Setting |
Outlet 135° CW from Inlet |
| Minor Diameter [Max |
Outlet 90° CW from Inlet |
| Major Diameter [Min |
3/4 in Flange |
| Shaft End Pressure [Max |
1 in Flange |
| Mounting |
1.1 |
| Displacement Cover End (cu in/revolution) |
2.45 |