3G2752 4J8494 3G2197 4J8480 3G2196 7J0554 7J0555 Hydraulic Vane Pump Cartridge Kit 25VQ used Excavator CAT Pump
| Relief Valve Setting: |
75.0 LB |
| Shaft Key: |
Flange Mount |
| Pressure Port Size, Cover End: |
Left Hand (CCW) |
| Minor Diameter [Max: |
3520VQ38A5-11CC20LH |
| Spline Description: |
3 |
| Displacement Cover End (cu in/revolution): |
Flange |
| Port Orientation - Cover End: |
N/A |
| Port Size: |
Standard Pilot |
| PDF |
|
Product Details
| Relief Valve Setting |
75.0 LB |
| Shaft Key |
Flange Mount |
| Pressure Port Size, Cover End |
Left Hand (CCW) |
| Minor Diameter [Max |
3520VQ38A5-11CC20LH |
| Spline Description |
3 |
| Displacement Cover End (cu in/revolution) |
Flange |
| Port Orientation - Cover End |
N/A |
| Port Size |
Standard Pilot |
| Shaft End Flow @ RPM |
1.25 in |
| Major Diameter [Min |
14 Tooth Splined |
| GPM @ 1,800 rpm, Shaft End |
3520VQ |
| Port Orientation - Shaft End |
1 15/16 in |
| Mounting Flange |
Buna-N |
| Shaft End RPM [Max |
2400 |
| Shaft Type |
1.04 in |
| Seal Material |
SAE C, 2 Bolt |
| Integral Valve Configuration |
Single Shaft Seal |
| Pump Series |
12/24 |
| GPM @ 1,800 rpm, Cover End |
2500 |
| Port Type |
2400 |
| Model No. |
N/A |
| Controlled Flow Rate |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Rotation |
1.248 in |
| Shaft Length |
1.247 in |
| Manufacturer Part No. |
N/A |
| Minor Diameter [Min |
N/A |
| Max. RPM [Max |
N/A |
| Pressure Port Size, Shaft End |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Cover End RPM [Max |
3520VQ38A5-11CC20LH |
| Pilot Type |
3000 |
| Minor Diameter |
3000 |
| Cover End Pressure [Max |
7.5 |
| Shaft Seal Type |
57 |
| Cover End Flow @ RPM |
w/o Integral Valves |
| Shaft Dia. |
Outlet 45° CW from Inlet |
| Displacement Shaft End (cu in/revolution) |
Outlet Inline w/Inlet |
| Major Diameter [Max |
3/4 in Flange |
| Weight |
1 1/4 in Flange |
| Shaft End Pressure [Max |
1.1 |
| Mounting |
7.42 |