CAT Excavator 345C 2668034 266-8034 Gear Pump Fan Hydraulic Pump
| Pump Series: |
45.0 LB |
| Relief Valve Setting: |
Flange Mount |
| Port Type: |
Right Hand (CW) |
| Shaft Seal Type: |
2520V12A5-11AB22R |
| Shaft End Pressure [Max: |
2 1/2 |
| Shaft Key: |
Flange |
| Cover End RPM [Max: |
N/A |
| Port Size: |
Standard Pilot |
| PDF |
|
Product Details
| Pump Series |
45.0 LB |
| Relief Valve Setting |
Flange Mount |
| Port Type |
Right Hand (CW) |
| Shaft Seal Type |
2520V12A5-11AB22R |
| Shaft End Pressure [Max |
2 1/2 |
| Shaft Key |
Flange |
| Cover End RPM [Max |
N/A |
| Port Size |
Standard Pilot |
| Minor Diameter [Min |
1.09 in |
| Major Diameter [Min |
13 Tooth Splined |
| Minor Diameter |
2520V |
| Pilot Type |
1.75 in |
| Integral Valve Configuration |
Buna-N |
| Shaft End Flow @ RPM |
1800 |
| Max. RPM [Max |
0.7285 in |
| Shaft End RPM [Max |
SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) |
Single Shaft Seal |
| Pressure Port Size, Cover End |
16/32 |
| GPM @ 1,800 rpm, Shaft End |
1800 |
| Shaft Type |
1800 |
| Manufacturer Part No. |
N/A |
| Shaft Length |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End |
0.873 in |
| Mounting Flange |
0.872 in |
| Shaft Dia. |
0.734 in |
| Port Orientation - Shaft End |
0.723 in |
| Seal Material |
N/A |
| Weight |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Mounting |
2520V12A5-11AB22R |
| Spline Description |
3000 |
| Cover End Flow @ RPM |
2500 |
| Rotation |
7.5 |
| Displacement Shaft End (cu in/revolution) |
18 |
| Controlled Flow Rate |
N/A |
| Port Orientation - Cover End |
Outlet 45° CCW from Inlet |
| Major Diameter [Max |
Outlet Opposite Inlet |
| Minor Diameter [Max |
3/4 in Code 61 |
| GPM @ 1,800 rpm, Cover End |
1 in Code 61 |
| Model No. |
1.1 |
| Cover End Pressure [Max |
2.5 |