VA20 VG20 Series Multiple Directional Control Valve Hydraulic
Minor Diameter: |
45.0 LB |
Mounting Flange: |
Flange Mount |
Shaft Length: |
Right Hand (CW) |
Shaft Key: |
2520VQ17A11-11DB20 |
Shaft Dia.: |
2 1/2 |
Relief Valve Setting: |
Flange |
Max. RPM [Max: |
N/A |
Port Orientation - Shaft End: |
Standard Pilot |
PDF |
|
Product Details
Minor Diameter |
45.0 LB |
Mounting Flange |
Flange Mount |
Shaft Length |
Right Hand (CW) |
Shaft Key |
2520VQ17A11-11DB20 |
Shaft Dia. |
2 1/2 |
Relief Valve Setting |
Flange |
Max. RPM [Max |
N/A |
Port Orientation - Shaft End |
Standard Pilot |
Minor Diameter [Max |
0.875 in |
Shaft Type |
13 Tooth Splined |
Port Size |
2520VQ |
Integral Valve Configuration |
1 3/8 in |
Rotation |
Buna-N |
Cover End Flow @ RPM |
2500 |
Manufacturer Part No. |
0.715 in |
Pump Series |
SAE B, 2 Bolt |
Pressure Port Size, Cover End |
Single Shaft Seal |
Shaft End Flow @ RPM |
16/32 |
Major Diameter [Min |
2700 |
Cover End RPM [Max |
2500 |
Controlled Flow Rate |
N/A |
Model No. |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Minor Diameter [Min |
0.873 in |
GPM @ 1,800 rpm, Shaft End |
0.872 in |
Seal Material |
N/A |
Displacement Shaft End (cu in/revolution) |
N/A |
Port Orientation - Cover End |
N/A |
Pilot Type |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Spline Description |
2520VQ17A11-11DB20 |
Shaft End RPM [Max |
3000 |
Major Diameter [Max |
3000 |
Port Type |
16.5 |
Cover End Pressure [Max |
25.5 |
Weight |
w/o Integral Valves |
Mounting |
Outlet 45° CCW from Inlet |
Shaft End Pressure [Max |
Outlet 90° CW from Inlet |
GPM @ 1,800 rpm, Cover End |
3/4 in Flange |
Shaft Seal Type |
1 in Flange |
Displacement Cover End (cu in/revolution) |
2.22 |
Pressure Port Size, Shaft End |
3.37 |