Replacement CAT 6E5831 Hydraulic Vane Pump Construction Machinery Parts
| Port Orientation - Cover End: |
75.0 LB |
| Spline Description: |
Flange Mount |
| Cover End RPM [Max: |
Right Hand (CW) |
| Mounting Flange: |
3520VQ25A11-11AA20 |
| Cover End Pressure [Max: |
3 |
| Minor Diameter: |
Flange |
| Shaft Dia.: |
N/A |
| Model No.: |
Standard Pilot |
| PDF |
|
Product Details
| Port Orientation - Cover End |
75.0 LB |
| Spline Description |
Flange Mount |
| Cover End RPM [Max |
Right Hand (CW) |
| Mounting Flange |
3520VQ25A11-11AA20 |
| Cover End Pressure [Max |
3 |
| Minor Diameter |
Flange |
| Shaft Dia. |
N/A |
| Model No. |
Standard Pilot |
| Controlled Flow Rate |
1.25 in |
| Pressure Port Size, Shaft End |
14 Tooth Splined |
| Pump Series |
3520VQ |
| Major Diameter [Max |
1 15/16 in |
| Manufacturer Part No. |
Buna-N |
| Minor Diameter [Max |
2500 |
| Shaft Seal Type |
1.04 in |
| Pressure Port Size, Cover End |
SAE C, 2 Bolt |
| Minor Diameter [Min |
Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End |
12/24 |
| Shaft End RPM [Max |
2500 |
| Relief Valve Setting |
2500 |
| Major Diameter [Min |
N/A |
| Pilot Type |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Seal Material |
1.248 in |
| Mounting |
1.247 in |
| Shaft Length |
N/A |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Port Orientation - Shaft End |
N/A |
| Weight |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Max. RPM [Max |
3520VQ25A11-11AA20 |
| Cover End Flow @ RPM |
3000 |
| Integral Valve Configuration |
3000 |
| Displacement Cover End (cu in/revolution) |
16.5 |
| Shaft End Flow @ RPM |
37.5 |
| Rotation |
w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End |
Outlet 135° CCW from Inlet |
| Shaft End Pressure [Max |
Outlet Opposite Inlet |
| Port Size |
3/4 in Flange |
| Port Type |
1 1/4 in Flange |
| Shaft Key |
2.22 |
| Shaft Type |
4.98 |