Hydraulic Gear Oil Pump 705-11-32530 for Bulldozer D61
Minor Diameter [Max: |
35.0 LB |
Shaft End Pressure [Max: |
Flange Mount |
Port Orientation - Cover End: |
Right Hand (CW) |
Seal Material: |
V2020-1F12S7S-1CC30 |
Rotation: |
2 |
Port Size: |
Flange |
Displacement Shaft End (cu in/revolution): |
3/16 in |
Spline Description: |
N/A |
PDF |
|
Product Details
Minor Diameter [Max |
35.0 LB |
Shaft End Pressure [Max |
Flange Mount |
Port Orientation - Cover End |
Right Hand (CW) |
Seal Material |
V2020-1F12S7S-1CC30 |
Rotation |
2 |
Port Size |
Flange |
Displacement Shaft End (cu in/revolution) |
3/16 in |
Spline Description |
N/A |
Shaft End RPM [Max |
0.875 in |
Integral Valve Configuration |
Straight w/ Key |
Shaft Seal Type |
V2020 |
Major Diameter [Min |
2 5/16 in |
Port Type |
Buna-N |
Cover End Flow @ RPM |
2400 |
Weight |
N/A |
Cover End Pressure [Max |
SAE B, 2 Bolt |
Shaft End Flow @ RPM |
Single Shaft Seal |
Mounting Flange |
N/A |
Pilot Type |
2500 |
Displacement Cover End (cu in/revolution) |
2400 |
Minor Diameter [Min |
N/A |
Shaft Dia. |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
Minor Diameter |
N/A |
Major Diameter [Max |
N/A |
GPM @ 1,800 rpm, Cover End |
N/A |
Shaft Type |
N/A |
Pressure Port Size, Shaft End |
N/A |
Max. RPM [Max |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Shaft Length |
V2020-1F12S7S-1CC30 |
Model No. |
2500 |
Shaft Key |
2200 |
Cover End RPM [Max |
10.5 |
Manufacturer Part No. |
18 |
Pressure Port Size, Cover End |
N/A |
GPM @ 1,800 rpm, Shaft End |
Outlet Inline w/Inlet |
Port Orientation - Shaft End |
Outlet Inline w/Inlet |
Mounting |
3/4 in SAE O-Ring |
Controlled Flow Rate |
3/4 in SAE O-Ring |
Relief Valve Setting |
1.39 |
Pump Series |
2.38 |