CAT 1843124 184-3124 Piston Pump for Caterpillar Wheel Dozer 824
| Spline Description: |
18.0 LB |
| Max. RPM [Max: |
Flange Mount |
| Displacement Cover End (cu in/revolution): |
Right Hand (CW) |
| Major Diameter [Min: |
8 gal/min @ 1200 rpm |
| Displacement Shaft End (cu in/revolution): |
1.25 |
| Pump Series: |
NPT |
| Mounting Flange: |
3/16 in |
| Shaft Seal Type: |
11 |
| PDF |
|
Product Details
| Spline Description |
18.0 LB |
| Max. RPM [Max |
Flange Mount |
| Displacement Cover End (cu in/revolution) |
Right Hand (CW) |
| Major Diameter [Min |
8 gal/min @ 1200 rpm |
| Displacement Shaft End (cu in/revolution) |
1.25 |
| Pump Series |
NPT |
| Mounting Flange |
3/16 in |
| Shaft Seal Type |
11 |
| Pressure Port Size, Shaft End |
8 gpm @ 1200 rpm |
| Pilot Type |
0.75 in |
| Shaft Type |
Straight w/ Key |
| Minor Diameter |
12 / 1750 |
| Cover End RPM [Max |
V20 |
| Integral Valve Configuration |
2.66 in |
| Shaft Dia. |
SAE-12 |
| Relief Valve Setting |
Viton |
| Minor Diameter [Max |
2800 |
| Major Diameter [Max |
2500 psi |
| Shaft End Pressure [Max |
12 |
| Weight |
P |
| Cover End Pressure [Max |
SAE A, 2 Bolt |
| Pressure Port Size, Cover End |
S |
| Shaft End RPM [Max |
1 |
| Manufacturer Part No. |
Inline w/ Inlet |
| Port Size |
1.6 |
| Shaft End Flow @ RPM |
w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End |
1C |