Hydraulic Gear Pump 705-12-32010 Steering Pump for Bulldozer D41A-3
| Minor Diameter: |
30.0 LB |
| Shaft Type: |
Flange Mount |
| Displacement Shaft End (cu in/revolution): |
Right Hand (CW) |
| Manufacturer Part No.: |
V2010-1F7S6S-1BB12 |
| Weight: |
1 1/2 |
| Shaft End RPM [Max: |
Flange |
| Minor Diameter [Min: |
3/16 in |
| GPM @ 1,800 rpm, Cover End: |
N/A |
| PDF |
|
Product Details
| Minor Diameter |
30.0 LB |
| Shaft Type |
Flange Mount |
| Displacement Shaft End (cu in/revolution) |
Right Hand (CW) |
| Manufacturer Part No. |
V2010-1F7S6S-1BB12 |
| Weight |
1 1/2 |
| Shaft End RPM [Max |
Flange |
| Minor Diameter [Min |
3/16 in |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Model No. |
0.875 in |
| Rotation |
Straight w/ Key |
| Shaft End Flow @ RPM |
V2010 |
| Integral Valve Configuration |
2.3125 in |
| Displacement Cover End (cu in/revolution) |
Buna-N |
| Shaft Seal Type |
3000 |
| Cover End RPM [Max |
N/A |
| Cover End Flow @ RPM |
SAE B, 2 Bolt |
| Port Type |
Single Shaft Seal |
| Max. RPM [Max |
N/A |
| Major Diameter [Min |
3000 |
| Pilot Type |
3000 |
| Shaft Dia. |
N/A |
| Port Orientation - Shaft End |
6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Pressure [Max |
N/A |
| Major Diameter [Max |
N/A |
| Port Size |
N/A |
| GPM @ 1,800 rpm, Shaft End |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Seal Material |
V2010-1F7S6S-1BB12 |
| Controlled Flow Rate |
2200 |
| Mounting Flange |
2500 |
| Minor Diameter [Max |
9 |
| Shaft Key |
10.5 |
| Pump Series |
N/A |
| Spline Description |
Outlet 45° CCW from Inlet |
| Pressure Port Size, Cover End |
Outlet 90° CCW from Inlet |
| Shaft Length |
1/2 in SAE O-Ring |
| Port Orientation - Cover End |
3/4 in SAE O-Ring |
| Mounting |
1.19 |
| Pressure Port Size, Shaft End |
1.39 |