Hydstar Excavator Engine 6D105 Lubricated Oil Pump 6136-52-1100
| Minor Diameter [Max: |
45.0 LB |
| Controlled Flow Rate: |
Flange Mount |
| Minor Diameter [Min: |
Right Hand (CW) |
| Rotation: |
2520V21A8-1CA22R |
| Model No.: |
2.5 |
| Weight: |
Flange |
| Port Type: |
1/4 in |
| Displacement Cover End (cu in/revolution): |
1.7 |
Product Details
| Minor Diameter [Max |
45.0 LB |
| Controlled Flow Rate |
Flange Mount |
| Minor Diameter [Min |
Right Hand (CW) |
| Rotation |
2520V21A8-1CA22R |
| Model No. |
2.5 |
| Weight |
Flange |
| Port Type |
1/4 in |
| Displacement Cover End (cu in/revolution) |
1.7 |
| Shaft Seal Type |
Standard Pilot |
| Relief Valve Setting |
0.875 in |
| Shaft Dia. |
Straight w/ Key |
| Spline Description |
2520V |
| Cover End Flow @ RPM |
2.32 in |
| GPM @ 1,800 rpm, Cover End |
Double |
| Major Diameter [Min |
Buna-N |
| GPM @ 1,800 rpm, Shaft End |
1800 |
| Displacement Shaft End (cu in/revolution) |
4.1 |
| Shaft End RPM [Max |
SAE B, 2 Bolt |
| Major Diameter [Max |
Single Shaft Seal |
| Seal Material |
N/A |
| Pressure Port Size, Shaft End |
1 in Code 61 |
| Port Orientation - Cover End |
1800 |
| Cover End RPM [Max |
1800 |
| Mounting |
N/A |
| Minor Diameter |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Shaft Type |
N/A |
| Port Size |
N/A |
| Shaft End Flow @ RPM |
N/A |
| Shaft End Pressure [Max |
N/A |
| Pressure Port Size, Cover End |
3/4 in Code 61 |
| Manufacturer Part No. |
2520V21A8-1CA22R |
| Max. RPM [Max |
4 Bolt Flange Per SAE J518C W/ English Threads |
| Pilot Type |
3000 |
| Cover End Pressure [Max |
2500 |
| Mounting Flange |
12 |
| Pump Series |
31.5 |
| Shaft Length |
135° CCW From Inlet Port |
| Integral Valve Configuration |
N/A |
| Shaft Key |
Outlet 135° CCW from Inlet |