Hydraulic Transmission Gear Pump 121-7385 for CAT 416C 416D Backhoe Loader
| Manufacturer Part No.: |
30.0 LB |
| GPM @ 1,800 rpm, Shaft End: |
Flange Mount |
| Shaft End Pressure [Max: |
Right Hand (CW) |
| Spline Description: |
V2010-1F13S3S-1BA12 |
| Minor Diameter [Max: |
1 1/2 |
| Controlled Flow Rate: |
Flange |
| Port Type: |
3/16 in |
| Minor Diameter: |
N/A |
| PDF |
|
Product Details
| Manufacturer Part No. |
30.0 LB |
| GPM @ 1,800 rpm, Shaft End |
Flange Mount |
| Shaft End Pressure [Max |
Right Hand (CW) |
| Spline Description |
V2010-1F13S3S-1BA12 |
| Minor Diameter [Max |
1 1/2 |
| Controlled Flow Rate |
Flange |
| Port Type |
3/16 in |
| Minor Diameter |
N/A |
| Pilot Type |
0.875 in |
| Major Diameter [Min |
Straight w/ Key |
| Pump Series |
V2010 |
| Cover End RPM [Max |
2 5/16 in |
| Pressure Port Size, Shaft End |
Buna-N |
| Pressure Port Size, Cover End |
2400 |
| Relief Valve Setting |
N/A |
| Integral Valve Configuration |
SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) |
Single Shaft Seal |
| Shaft Dia. |
N/A |
| Seal Material |
3000 |
| Shaft Seal Type |
2400 |
| Mounting Flange |
N/A |
| Displacement Shaft End (cu in/revolution) |
3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm |
| Shaft End RPM [Max |
N/A |
| Model No. |
N/A |
| Max. RPM [Max |
N/A |
| Shaft Type |
N/A |
| Shaft Key |
N/A |
| Rotation |
13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
V2010-1F13S3S-1BA12 |
| Cover End Flow @ RPM |
2500 |
| Mounting |
2200 |
| Cover End Pressure [Max |
4.5 |
| GPM @ 1,800 rpm, Cover End |
19.5 |
| Shaft End Flow @ RPM |
N/A |
| Port Size |
Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet 90° CCW from Inlet |
| Port Orientation - Cover End |
1/2 in SAE O-Ring |
| Shaft Length |
3/4 in SAE O-Ring |
| Minor Diameter [Min |
0.6 |
| Weight |
2.59 |