Hydraulic Gear Charge Pump 90R055 90R075 90R100 90R130 90R180 90R250
| Max. RPM [Max: |
45.0 LB |
| Shaft End Pressure [Max: |
Flange Mount |
| Displacement Shaft End (cu in/revolution): |
2.5 |
| Mounting: |
2520VQ12A5-11CC20LH |
| GPM @ 1,800 rpm, Shaft End: |
2.5 |
| Minor Diameter [Max: |
Flange |
| Major Diameter [Min: |
N/A |
| Controlled Flow Rate: |
Standard Pilot |
Product Details
| Max. RPM [Max |
45.0 LB |
| Shaft End Pressure [Max |
Flange Mount |
| Displacement Shaft End (cu in/revolution) |
2.5 |
| Mounting |
2520VQ12A5-11CC20LH |
| GPM @ 1,800 rpm, Shaft End |
2.5 |
| Minor Diameter [Max |
Flange |
| Major Diameter [Min |
N/A |
| Controlled Flow Rate |
Standard Pilot |
| Seal Material |
0.875 in |
| GPM @ 1,800 rpm, Cover End |
13 Tooth Splined |
| Shaft Length |
2520VQ |
| Shaft Seal Type |
1 3/8 in |
| Model No. |
Double |
| Shaft Key |
Buna-N |
| Minor Diameter [Min |
2700 |
| Port Type |
0.715 in |
| Shaft End Flow @ RPM |
SAE B, 2 Bolt |
| Mounting Flange |
Single Shaft Seal |
| Cover End RPM [Max |
16/32 |
| Pressure Port Size, Cover End |
2700 |
| Shaft Dia. |
2700 |
| Pump Series |
N/A |
| Relief Valve Setting |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Minor Diameter |
0.873 in |
| Manufacturer Part No. |
0.872 in |
| Integral Valve Configuration |
N/A |
| Spline Description |
N/A |
| Major Diameter [Max |
N/A |
| Weight |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
2520VQ12A5-11CC20LH |
| Cover End Flow @ RPM |
3000 |
| Port Orientation - Shaft End |
3000 |
| Rotation |
7.5 |
| Shaft Type |
18 |
| Port Orientation - Cover End |
w/o Integral Valves |
| Pressure Port Size, Shaft End |
Outlet 45° CW from Inlet |
| Shaft End RPM [Max |
Outlet Inline w/Inlet |
| Pilot Type |
3/4 in Flange |
| Port Size |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
1.1 |