Replacement Japan excavator engine part on 4D95L water pump 6204-61-1102
| Spline Description: |
45.0 LB |
| Model No.: |
Flange Mount |
| Minor Diameter [Max: |
Left Hand (CCW) |
| Mounting: |
2520VQ17A14-11CC20-LH |
| Pilot Type: |
2.5 |
| Shaft End RPM [Max: |
Flange |
| Manufacturer Part No.: |
N/A |
| Controlled Flow Rate: |
Standard Pilot |
| PDF |
|
Product Details
| Spline Description |
45.0 LB |
| Model No. |
Flange Mount |
| Minor Diameter [Max |
Left Hand (CCW) |
| Mounting |
2520VQ17A14-11CC20-LH |
| Pilot Type |
2.5 |
| Shaft End RPM [Max |
Flange |
| Manufacturer Part No. |
N/A |
| Controlled Flow Rate |
Standard Pilot |
| Port Type |
0.875 in |
| Cover End Pressure [Max |
13 Tooth Splined |
| Weight |
2520VQ |
| Max. RPM [Max |
1.375 in |
| Shaft Seal Type |
Double |
| Shaft Length |
Buna-N |
| Minor Diameter |
2500 |
| GPM @ 1,800 rpm, Cover End |
0.715 in |
| GPM @ 1,800 rpm, Shaft End |
SAE B, 2 Bolt |
| Shaft End Pressure [Max |
Single Shaft Seal |
| Port Orientation - Shaft End |
16/32 |
| Pressure Port Size, Cover End |
2700 |
| Pump Series |
2500 |
| Minor Diameter [Min |
N/A |
| Relief Valve Setting |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Seal Material |
0.873 in |
| Mounting Flange |
0.872 in |
| Shaft End Flow @ RPM |
N/A |
| Port Size |
N/A |
| Shaft Key |
N/A |
| Cover End RPM [Max |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Shaft Dia. |
2520VQ17A14-11CC20-LH |
| Displacement Cover End (cu in/revolution) |
2000 |
| Cover End Flow @ RPM |
3000 |
| Displacement Shaft End (cu in/revolution) |
3.4 |
| Integral Valve Configuration |
25.5 |
| Rotation |
w/o Integral Valves |
| Major Diameter [Min |
Outlet 45° CW from Inlet |
| Port Orientation - Cover End |
Outlet Inline w/Inlet |
| Major Diameter [Max |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 in Flange |
| Shaft Type |
2.8 |