CAT Cooling Hydraulic Engine Water Pump Assembly 2W8001 For Excavator Diesel Engine 3304 3306
| Weight: |
75.0 LB |
| GPM @ 1,800 rpm, Shaft End: |
Flange Mount |
| Minor Diameter: |
Right Hand (CW) |
| Shaft End Pressure [Max: |
3520VQ30A5-11DD20 |
| Seal Material: |
3 |
| Port Type: |
Flange |
| Displacement Shaft End (cu in/revolution): |
N/A |
| Controlled Flow Rate: |
Standard Pilot |
| PDF |
|
Product Details
| Weight |
75.0 LB |
| GPM @ 1,800 rpm, Shaft End |
Flange Mount |
| Minor Diameter |
Right Hand (CW) |
| Shaft End Pressure [Max |
3520VQ30A5-11DD20 |
| Seal Material |
3 |
| Port Type |
Flange |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Controlled Flow Rate |
Standard Pilot |
| Shaft Seal Type |
1.25 in |
| Shaft Dia. |
14 Tooth Splined |
| Cover End Flow @ RPM |
3520VQ |
| Relief Valve Setting |
1 15/16 in |
| Shaft Type |
Buna-N |
| Pilot Type |
2500 |
| Spline Description |
1.04 in |
| GPM @ 1,800 rpm, Cover End |
SAE C, 2 Bolt |
| Major Diameter [Max |
Single Shaft Seal |
| Minor Diameter [Min |
12/24 |
| Pressure Port Size, Shaft End |
2500 |
| Mounting Flange |
2500 |
| Pressure Port Size, Cover End |
N/A |
| Shaft End Flow @ RPM |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
1.248 in |
| Max. RPM [Max |
1.247 in |
| Shaft Key |
N/A |
| Integral Valve Configuration |
N/A |
| Mounting |
N/A |
| Shaft Length |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Model No. |
3520VQ30A5-11DD20 |
| Rotation |
3000 |
| Shaft End RPM [Max |
3000 |
| Major Diameter [Min |
7.5 |
| Minor Diameter [Max |
45 |
| Port Orientation - Cover End |
w/o Integral Valves |
| Cover End Pressure [Max |
Outlet 135° CW from Inlet |
| Manufacturer Part No. |
Outlet 90° CW from Inlet |
| Cover End RPM [Max |
3/4 in Flange |
| Port Orientation - Shaft End |
1 1/4 in Flange |
| Pump Series |
1.1 |
| Port Size |
5.96 |