9J8660 Barrel Cylinder Block for Cat 12G/120G/130G/140G/160G Grader Main Piston Pump
| Major Diameter [Min: |
30.0 LB |
| Mounting: |
Flange Mount |
| Max. RPM [Max: |
Right Hand (CW) |
| Seal Material: |
V2010-1F6S2S-11AA12 |
| Model No.: |
1.5 |
| Minor Diameter [Max: |
Flange |
| Pump Series: |
N/A |
| Integral Valve Configuration: |
N/A |
| PDF |
|
Product Details
| Major Diameter [Min |
30.0 LB |
| Mounting |
Flange Mount |
| Max. RPM [Max |
Right Hand (CW) |
| Seal Material |
V2010-1F6S2S-11AA12 |
| Model No. |
1.5 |
| Minor Diameter [Max |
Flange |
| Pump Series |
N/A |
| Integral Valve Configuration |
N/A |
| Port Orientation - Shaft End |
0.875 in |
| Port Size |
13 Tooth Splined |
| Cover End Flow @ RPM |
V2010 |
| GPM @ 1,800 rpm, Shaft End |
1 5/16 in |
| Pilot Type |
Double |
| Shaft Key |
Buna-N |
| Cover End RPM [Max |
3000 |
| Relief Valve Setting |
0.728 in |
| Port Type |
SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) |
Single Shaft Seal |
| Shaft End RPM [Max |
16/32 |
| Shaft Seal Type |
3000 |
| Cover End Pressure [Max |
3000 |
| Controlled Flow Rate |
N/A |
| Shaft Type |
2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| Shaft Length |
0.873 in |
| Displacement Shaft End (cu in/revolution) |
1.2 |
| Mounting Flange |
0.734 in |
| Pressure Port Size, Shaft End |
0.723 in |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Shaft End Flow @ RPM |
6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
V2010-1F6S2S-11AA12 |
| Manufacturer Part No. |
2500 |
| Weight |
2500 |
| Major Diameter [Max |
3 |
| Rotation |
9 |
| Minor Diameter |
N/A |
| Minor Diameter [Min |
Outlet 135° CCW from Inlet |
| Shaft End Pressure [Max |
Outlet Opposite Inlet |
| Port Orientation - Cover End |
1/2 in SAE O-Ring |
| Shaft Dia. |
3/4 in SAE O-Ring |
| Spline Description |
0.4 |