Rexroth DBW30B2-5X/315-6EG24N9K4 PRESSURE RELIEF VALVE
Rexroth PRESSURE RELIEF VALVE Stamped Steel Cage Type offers a METRIC Design Units Rexroth DBW30B2-5X/315-6EG24N9K4 PRESSURE RELIEF VALVE selection of Genuine Rexroth PRESSURE RELIEF VALVE at Wholesale Prices. We are a Rexroth DBW30B2-5X/315-6EG24N9K4 PRESSURE RELIEF VALVE Certified Parts Retailer
| Brand Name: | Rexroth |
| Model Number: | DBW30B2-5X/315-6EG24N9K4 |
| Cover End Flow @ RPM: | 76.0 LB |
| Pump Series: | Flange Mount |
| Weight: | Right Hand (CW) |
| Rotation: | 3525VQ35A21-11DD20 |
| Manufacturer Part No.: | 3 |
| Displacement Cover End (cu in/revolution): | Flange |
| Minor Diameter [Max: | N/A |
| Shaft Length: | Standard Pilot |
Product Details
| Cover End Flow @ RPM | 76.0 LB |
| Pump Series | Flange Mount |
| Weight | Right Hand (CW) |
| Rotation | 3525VQ35A21-11DD20 |
| Manufacturer Part No. | 3 |
| Displacement Cover End (cu in/revolution) | Flange |
| Minor Diameter [Max | N/A |
| Shaft Length | Standard Pilot |
| Cover End RPM [Max | 1.25 in |
| Port Type | 14 Tooth Splined |
| Pressure Port Size, Shaft End | 3525VQ |
| Shaft Key | 1.9375 in |
| Port Size | Buna-N |
| Relief Valve Setting | 2400 |
| GPM @ 1,800 rpm, Cover End | 1.04 in |
| Pilot Type | SAE C, 2 Bolt |
| Max. RPM [Max | Single Shaft Seal |
| Minor Diameter | 12/24 |
| Shaft Seal Type | 2500 |
| Shaft End RPM [Max | 2400 |
| Minor Diameter [Min | N/A |
| Displacement Shaft End (cu in/revolution) | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Spline Description | 1.248 in |
| Cover End Pressure [Max | 1.247 in |
| Major Diameter [Max | N/A |
| Seal Material | N/A |
| Pressure Port Size, Cover End | N/A |
| Shaft End Pressure [Max | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Major Diameter [Min | 3525VQ35A21-11DD20 |
| Shaft Type | 3000 |
| Port Orientation - Cover End | 3000 |
| Shaft Dia. | 31.5 |
| Mounting Flange | 52.5 |
| Controlled Flow Rate | w/o Integral Valves |
| Shaft End Flow @ RPM | Outlet 135° CW from Inlet |
| Port Orientation - Shaft End | Outlet 90° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End | 1 in Flange |
| Integral Valve Configuration | 1 1/4 in Flange |
| Mounting | 4.12 |
| Model No. | 6.88 |