Rexroth M-2SEW6N3X/420MG205N9K4 THROTTLE VALVE
Find the discount Rexroth M-2SEW6N3X/420MG205N9K4 THROTTLE VALVE online you need . We offer ... If you check out our large selection of Rexroth M-2SEW6N3X/420MG205N9K4 THROTTLE VALVE once 3.543 in Outside Diameter D .
| Brand Name: | Rexroth |
| Model Number: | M-2SEW6N3X/420MG205N9K4 |
| Major Diameter [Min: | 75.0 LB |
| Pump Series: | Flange Mount |
| Pressure Port Size, Cover End: | Right Hand (CW) |
| Shaft Type: | 3520VQ30A11-1DD20 |
| Port Orientation - Shaft End: | 3 |
| Displacement Cover End (cu in/revolution): | Flange |
| GPM @ 1,800 rpm, Shaft End: | 5/16 in |
| Minor Diameter [Min: | Standard Pilot |
Product Details
| Major Diameter [Min | 75.0 LB |
| Pump Series | Flange Mount |
| Pressure Port Size, Cover End | Right Hand (CW) |
| Shaft Type | 3520VQ30A11-1DD20 |
| Port Orientation - Shaft End | 3 |
| Displacement Cover End (cu in/revolution) | Flange |
| GPM @ 1,800 rpm, Shaft End | 5/16 in |
| Minor Diameter [Min | Standard Pilot |
| Spline Description | 1.25 in |
| Relief Valve Setting | Straight w/ Key |
| Rotation | 3520VQ |
| Pressure Port Size, Shaft End | 2 1/2 in |
| Shaft End Pressure [Max | Buna-N |
| Pilot Type | 2500 |
| Max. RPM [Max | N/A |
| Integral Valve Configuration | SAE C, 2 Bolt |
| Displacement Shaft End (cu in/revolution) | Single Shaft Seal |
| Shaft Seal Type | N/A |
| Shaft Dia. | 2500 |
| Shaft End Flow @ RPM | 2500 |
| Minor Diameter [Max | N/A |
| Mounting Flange | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Port Type | N/A |
| Mounting | N/A |
| Major Diameter [Max | N/A |
| Minor Diameter | N/A |
| Shaft End RPM [Max | N/A |
| Model No. | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Port Size | 3520VQ30A11-1DD20 |
| Controlled Flow Rate | 3000 |
| Shaft Length | 3000 |
| Seal Material | 16.5 |
| Cover End RPM [Max | 45 |
| Shaft Key | w/o Integral Valves |
| Weight | Outlet 135° CW from Inlet |
| Cover End Pressure [Max | Outlet 90° CW from Inlet |
| GPM @ 1,800 rpm, Cover End | 3/4 in Flange |
| Port Orientation - Cover End | 1 1/4 in Flange |
| Manufacturer Part No. | 2.22 |
| Cover End Flow @ RPM | 5.96 |