Rexroth M-2SEW6N3X/630MG24N9K4 THROTTLE VALVE
QuestionRexroth M-2SEW6N3X/630MG24N9K4 THROTTLE VALVE ? Open closure type: Find what you need faster by entering (2) Flange flanges: your Rexroth THROTTLE VALVE information 523 kN dynamic load capacity: .
| Brand Name: | Rexroth |
| Model Number: | M-2SEW6N3X/630MG24N9K4 |
| Weight: | 45.0 LB |
| Shaft Dia.: | Flange Mount |
| Shaft Seal Type: | Left Hand (CCW) |
| Minor Diameter [Min: | 2520VQ21A14-1DB20LH |
| Mounting Flange: | 2 1/2 |
| Spline Description: | Flange |
| GPM @ 1,800 rpm, Shaft End: | 3/16 in |
| Relief Valve Setting: | Standard Pilot |
Product Details
| Weight | 45.0 LB |
| Shaft Dia. | Flange Mount |
| Shaft Seal Type | Left Hand (CCW) |
| Minor Diameter [Min | 2520VQ21A14-1DB20LH |
| Mounting Flange | 2 1/2 |
| Spline Description | Flange |
| GPM @ 1,800 rpm, Shaft End | 3/16 in |
| Relief Valve Setting | Standard Pilot |
| Shaft End RPM [Max | 0.875 in |
| Major Diameter [Max | Straight w/ Key |
| Pilot Type | 2520VQ |
| Controlled Flow Rate | 1.9375 in |
| Port Orientation - Shaft End | Buna-N |
| Shaft Key | 2500 |
| Minor Diameter | N/A |
| Pump Series | SAE B, 2 Bolt |
| Cover End RPM [Max | Single Shaft Seal |
| Integral Valve Configuration | N/A |
| Mounting | 2700 |
| Model No. | 2500 |
| GPM @ 1,800 rpm, Cover End | N/A |
| Manufacturer Part No. | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Cover End Flow @ RPM | N/A |
| Shaft End Flow @ RPM | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Displacement Shaft End (cu in/revolution) | N/A |
| Port Type | N/A |
| Shaft Length | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Major Diameter [Min | 2520VQ21A14-1DB20LH |
| Minor Diameter [Max | 2000 |
| Max. RPM [Max | 3000 |
| Seal Material | 21 |
| Port Size | 31.5 |
| Port Orientation - Cover End | w/o Integral Valves |
| Pressure Port Size, Cover End | Outlet 45° CCW from Inlet |
| Pressure Port Size, Shaft End | Outlet 90° CW from Inlet |
| Rotation | 3/4 in Flange |
| Shaft Type | 1 in Flange |
| Cover End Pressure [Max | 2.8 |
| Shaft End Pressure [Max | 4.12 |