Rexroth M-3SEW6C3X/630MG24N9K4 THROTTLE VALVE
Find 12 mm t the discount Rexroth M-3SEW6C3X/630MG24N9K4 THROTTLE VALVE online you need . We 280.00 mm d1 offer ... If you check out our large selection of Rexroth M-3SEW6C3X/630MG24N9K4 THROTTLE VALVE once .
| Brand Name: | Rexroth |
| Model Number: | M-3SEW6C3X/630MG24N9K4 |
| Major Diameter [Min: | 95.0 LB |
| Pressure Port Size, Cover End: | Flange Mount |
| Shaft Dia.: | Right Hand (CW) |
| Pump Series: | 4520VQ50A5-11BB20 |
| Spline Description: | 3 1/2 |
| Relief Valve Setting: | Flange |
| Shaft End Flow @ RPM: | N/A |
| Pilot Type: | Standard Pilot |
Product Details
| Major Diameter [Min | 95.0 LB |
| Pressure Port Size, Cover End | Flange Mount |
| Shaft Dia. | Right Hand (CW) |
| Pump Series | 4520VQ50A5-11BB20 |
| Spline Description | 3 1/2 |
| Relief Valve Setting | Flange |
| Shaft End Flow @ RPM | N/A |
| Pilot Type | Standard Pilot |
| Model No. | 1.25 in |
| Shaft Key | 14 Tooth Splined |
| Cover End Flow @ RPM | 4520VQ |
| Controlled Flow Rate | 1 15/16 in |
| Pressure Port Size, Shaft End | Buna-N |
| Displacement Cover End (cu in/revolution) | 2200 |
| GPM @ 1,800 rpm, Shaft End | 1.04 in |
| Port Type | SAE C, 2 Bolt |
| Manufacturer Part No. | Single Shaft Seal |
| Minor Diameter [Min | 12/24 |
| GPM @ 1,800 rpm, Cover End | 2200 |
| Shaft Seal Type | 2200 |
| Port Size | N/A |
| Weight | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Mounting Flange | 1.248 in |
| Seal Material | 1.247 in |
| Minor Diameter [Max | N/A |
| Cover End RPM [Max | N/A |
| Shaft End Pressure [Max | N/A |
| Shaft Type | 50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 4520VQ50A5-11BB20 |
| Port Orientation - Cover End | 3000 |
| Rotation | 2500 |
| Integral Valve Configuration | 7.5 |
| Mounting | 75 |
| Port Orientation - Shaft End | w/o Integral Valves |
| Minor Diameter | Outlet 45° CCW from Inlet |
| Max. RPM [Max | Outlet 90° CCW from Inlet |
| Major Diameter [Max | 3/4 in Flange |
| Shaft Length | 1 1/2 in Flange |
| Cover End Pressure [Max | 1.1 |
| Shaft End RPM [Max | 9.9 |